Fine fuel moisture code

Description


The Fine fuel moisture code (\(FFMC\)) is one of the three fuel moisture code components of the Canadian forest fire weather index (\(FWI\)) system. The \(FFMC\) represents the moisture content of litter and other cured fine fuels in a forest stand, in a layer of dry weight about 0.25 kg/m2, and assesses the relative ease of ignition and the flammability of fine fuels at mid-afternoon. It requires temperature, relative air humidity, wind speed and precipitation (at noon) as input data (Van Wagner 1987).

Like the two other fuel moisture codes of the \(FWI\) (cf. \(DMC\) and \(DC\)), the \(FFMC\) comprises two phases: one for wetting by rain and one for drying.

As the \(FFMC\) measures the moisture content in fine surface fuels, it is well appropriated for predicting fire occurrence (Van Wagner 1987).


Formula


The \(FFMC\) is calculated as follows (Van Wagner and Pickett 1985):

First, the previous day's \(FFMC\) becomes \(FFMC_{t-1}\).

Then, the fine fuel moisture content from the previous day \(m_{t-1}\) has to be calculated:

\[m_{t-1}=147.2\cdot\dfrac{101-FFMC_{t-1}}{59.5+FFMC_{t-1}}\]

In case of rain (i.e. when \(P>0.5, cf. below), the fine fuel moisture content of the current day \(m_{r_t}\) for wetting phases (which will become the new \(m_{t-1}\)) is calculated as follows:

\[ m_{r_t}= \begin{cases} m_{t-1}+42.5\cdot{P_f}\cdot\Big(e^{\frac{-100}{251-m_{t-1}}}\Big)\cdot\Big(1-e^{\frac{-6.93}{P_f}}\Big), & \mbox{for }m_{t-1}\leqslant{150} \\ & \\ m_{t-1}+42.5\cdot{P_f}\cdot\Big(e^{\frac{-100}{251-m_{t-1}}}\Big)\cdot\Big(1-e^{\frac{-6.93}{P_f}}\Big)+0.0015\cdot(m_{t-1}-150)^{2}\cdot{P_f}^{0.5}, & \mbox{for }m_{t-1}>150 \end{cases}\]

where \(P_f\) is effective rainfall [mm] and calculated as follows:

\[P_f=P-0.5, \mbox{ for P}>0.5\]

where \(P\) [mm] is rainfall in open measured once daily at noon.

NB: if \(m_{r_t}\) > 250, then \(m_{r_t}\)=250

Then, the fine fuel moisture content for drying phases where \(E_d\) has to be calculated as follows:

\[E_d=0.942\cdot{H_{12}^{0.679}}+11\cdot {e^\frac{H_{12}-100}{10}}+0.18\cdot(21.1-T_{12})\cdot(1-e^{-0.115\cdot H_{12}})\]

where \(H_{12}\) is relative air humidity [%] and \(T_{12}\) air temperature [°C] at noon.

  • If \(E_d\) is smaller than \(m_{t-1}\), then the log drying rate \(k_d\) has to be calculated with the following equations:

    \[k_o=0.424\cdot\Bigg(1-\bigg(\dfrac{H_{12}}{100}\bigg)^{1.7}\Bigg)+0.0694\cdot U_{12}^{0.5}\cdot\Bigg(1-\bigg(\dfrac{H_{12}}{100}\bigg)^8\Bigg)\]

    \[k_d=k_o\cdot{0.581\cdot e^{0.0365\cdot T_{12}}}\]

    where \(U_{12}\) is wind speed [km/h] at noon.

    Then, the fine fuel moisture content \(m\) can be calculated as follows:

    \[m=E_d+(m_{t-1}-E_d)\cdot{10^{-k_d}}\]

  • If \(E_d is greater than \(m_{t-1}\), then the fine fuel equilibrium moisture content for wetting phases \(E_w\) has to be calculated instead:

    \[E_w=0.618\cdot {H_{12}^{0.753}}+10\cdot {e^\frac{H_{12}-100}{10}}+0.18\cdot(21.1-T_{12})\cdot(1-e^{-0.115\cdot H_{12}})\]

    • If \(E_w\) is greater than \(m_{t-1}\), then the log wetting rate \(k_w\) has to be calculated with the following equations:

      \[k_1=0.424\cdot\Bigg(1-\bigg(\dfrac{100-H_{12}}{100}\bigg)^{1.7}\Bigg)+0.0694\cdot U_{12}^{0.5}\cdot\Bigg(1-\bigg(\dfrac{100-H_{12}}{100}\bigg)^8\Bigg)\]

      \[k_w=k_1\cdot{0.581\cdot e^{0.0365\cdot T_{12}}}\]

      Then, the fine fuel moisture content \(m\) can be calculated as follows:

      \[m_t=E_w-(E_w-m_{t-1})\cdot{10^{-k_w}}\]

    • If \(E_w\leqslant{m_{t-1}}\leqslant{E_d}\), then \(m_t=m_{t-1}\)

Finally, the \(FFMC\) is calculated as follows:

\[FFMC_t=59.5\cdot\dfrac{250-m_t}{147.2+m_t}\]

The \(FFMC\) is supposed to be calculated on a daily basis. The meteorological data used for its calculation have to be recorded at noon (for fire danger prediction at about 4 pm).

The \(FFMC\) calculation starts, in regions normally covered by snow in winter, on the third day after snow has essentially left the area. In regions where snow cover is not a significant feature, the calculation starts on the third successive day with noon temperature greater than 12 °C (Lawson and Armitage 2008). The starting value of the index has to be set to 85.


References


Original publications:
Van Wagner and Pickett (1985)
Van Wagner (1987)

Other publication:
Lawson and Armitage (2008)